Integrated Quad CXP-12 Interface with NVIDIA Jetson
1. High-speed FPGA-based Edge AI system: up to 50 Gb/s
2. Integrated Quad CoaXPress, CXP-12 frame grabber links with PoCXP
3. NVIDIA Jetson Orin | Xavier NX SoM
4. Altera Arria 10 FPGA for image acquisition and pre-processing
5. Direct transfer of image buffers from FPGA to GPU memory
6. Dimensions: 134 x 90 x 60 mm | Weight: 750 g
7. Inline FPGA image processing options include:
· Real-time detection for object, event, or feature identification
· On-FPGA real-time compression: JPEG, Lossless, Quality+
· Real-time High Dynamic Range (HDR) correction
8. Jetson processing options:
· Compression: H.264 | H.265
· RTSP output option
DESCRIPTION |
Jetson with Quad CoaXPress-12 Frame Grabber
The FantoVision40-CXP12 is a rugged Jetson system with a fully integrated CoaXPress-12 frame grabber. Powered by the NVIDIA Jetson Orin NX, it captures and processes up to 4 × CoaXPress CXP-12 links with PoCXP. It merges high-end image acquisition on an Arria 10™ FPGA with real-time GPU processing on Jetson, enabling low-latency recording, streaming, and Edge AI in an ultra-compact, Low SWaP form factor.
Jetson CXP-12 Acquisition with Real-Time FPGA Image Processing
The FantoVision40-CXP12 is available as a plug-and-play CoaXPress frame grabber system or as part of a complete Imaging & Vision solution with real-time FPGA preprocessing, image enhancement, and compression options.
The built-in FPGA can process image data during acquisition, before it reaches the Jetson module. This helps reduce bandwidth, storage, and Jetson processing load while preserving low-latency performance for high-speed camera streams.
Optional FPGA processing includes Compression, HDR correction, Detection, and additional image enhancement modules.
Real-Time FPGA Processing Helps Enable:
Reduced bandwidth for high-throughput image acquisition
Low-latency processing directly in the acquisition flow
Extended recording time through real-time compression
Lower Jetson processing load by offloading selected tasks to the FPGA
Custom image pipelines using Gidel IPs or user FPGA logic
For the full list of available image processing and enhancement options, please refer to the Options tab.
Flexible Development Tools
· Open architecture: split/chain processing between FPGA and GPU
· GPU development: CUDA | C/C++ and NVIDIA AI libraries on Jetson
· FPGA development: rapid pre-processing deployment with ProcVision Suite
Integrated Vision Acquisition and Processing
Deploy a single compact node for acquisition, real-time pre-processing, Edge AI inference, and recording. This approach reduces cabling, latency, and overall system cost while improving reliability and maintainability.
For large-scale, synchronized camera deployments, Gidel’s InfiniVision multi-camera vision system enables synchronization and processing across 100+ sensors within a flexible acquisition framework.
For applications that require strict determinism, line-scan optimization, or guaranteed frame capture with fixed timing, ProcFG provides a dedicated deterministic image acquisition layer.
Both approaches integrate seamlessly into Gidel’s FPGA-based vision platforms and scale from single-node systems to multi-unit topologies.
Why Choose the FantoVision40-CXP12?
· Compact NVIDIA Jetson system with built-in Quad CXP-12 FPGA frame grabber
· PoCXP support for long-reach, robust camera connectivity
· Up to 50 Gb/s aggregate input bandwidth
· FPGA-plus-GPU architecture for low-latency acquisition, processing, recording, streaming, & Edge AI
· Optional real-time FPGA processing, image enhancement and compression IPs
The FantoVision40-CXP12 is the ideal choice when you need maximum CoaXPress throughput in a compact, low-latency Jetson platform.
SPECIFICATIONS |
General | |
Supported Protocols | CoaXPress 2.1 |
Camera Input Options | · 4 x CoaXPress-12 links · 2 x CoaXPress-12 links · 1 x CoaXPress-12 link · PoCXP |
Camera Input Connectors | 4 x Micro-BNC |
Supported CXP Downlink Speeds | · 1.25 Gb/s | CXP-1 · 2.5 Gb/s | CXP-2 · 3.125 Gb/s | CXP-3 · 5 Gb/s | CXP-5 · 6.25 Gb/s | CXP-6 · 10 Gb/s | CXP-10 · 12.5 Gb/s | CXP-12 |
Supported CXP Uplink Speeds | · 20.83 Mbps (CXP-1 to CXP-6) · 41.66 Mbps (CXP-10, CXP-12) |
Maximum Stream Packet Size | 8,192 bytes |
Advanced Features | · On-the -fly selective ROI acquisition · Link Aggregation mode · Chunk Data |
Jetson Host Interfaces | · 1 x GbE · 1 x USB 3.2 Gen 2 (single lane) · 1 x USB 2.0 · 1 x HDMI Out · 1 x Recovery · 1 x Restart · 1 x UART Max USB 3.x power allocation: ≤ 4 W |
Storage | NVMe interface:Gen 4 ×2 · Up to 8TB |
Image Formats | · Mono, Bayer, RGBA (8, 10, 12, 14 and 16 bits/color) · RGB (8, 10 and 12 bits/color) |
Max. Resolution | · Horizontal: 16 K pixels (64-bit) · Vertical: 65 K lines · For configurations supporting higher resolutions- Contact Us |
Real-Time Image Compression | Supports optional FPGA-based and Jetson-based compression options. |
Real-Time FPGA Image Processing & Enhancements | Supports optional FPGA image processing and enhancement modules. For the full list, please refer to the Options tab. |
Maximum Acquisition Throughput | 40 Gb/s |
Camera Types | · Area · Line Scan |
GPIO | · 8 x RS422 deferential pairs · 4 x Opto-Isolators · 6 x High-Drive output (including COMMON for discharge loop) · 4 x LVTTL · GPIO power out: 2 x 12V @ 1.0A aggregate · CAN bus |
Streaming & Communication Protocols | · Customizable streaming & communication using NVIDIA tools · RTSP streaming option |
Dimensions | 134L x 90W x 60H mm |
Weight | 750g |
Cooling | · Passive cooling · Active cooling (Fan) |
MTBF | MTBF values at 60% confidence and 40 °C case temperature are: |
Certifications | · CE · FCC · CCI |
Processors | |
Embedded computer | NVIDIA Jetson Orin NX 16GB |
Jetson computer resources | JNVIDIA Jetson Orin NX 16GB: · JetPack 6.2.1 · Up to 8-core Arm Cortex-A78AE 2MB L2 + 4MB L3 · 1024 Core Ampere, with 32 Tensor Cores · Up to 157 TOPS AI computation · Up to 16GB @ 102.4 GB/s · Video encode: 1 x 4K60, 3 x 4K30, 6 x 1080p60, 12 x 1080p30 (H.265), H.264, H.265, AV1 · Video decode: 1 x 8K30,2 x 4K60, 4 x 4K30, 9 x 1080p60, 18 x 1080p30 (H.265), H.264, H.265, VP9, AV1 |
FPGA Types | Altera Arria 10: · 160 GX · 270 GX · 660 GX |
GPU-FPGA interconnectivity | PCIe Gen 3 x4 @ up to 26.4 Gb/s |
Environmental Conditions | |
Temperature Range | · Commercial: 0 °C - 65 °C case temperature · Industrial: -25 °C - 65 °C case temperature. (Limited FPGA options) |
IP Compliance | · IP51-compliant · For configurations meeting higher IP standards, contact us |
Environmental Compliance | · RoHS · Conflict Minerals · ISO · Reach |
XIB-64Gbit PCI Express Camera
USB3.0 aufofocus camera
USB3 Vision compliant cameras - xiQ
Atik Apx60
(CXP) AS-FBD-4XCXP12-3PE4
Claxon CXP4
HawkEye-CXP-12 frame grabber
CamSim Camera simulator
PHAST Camera Link Fiber Adapter
PHOX Camera Link Fiber Extender
CLS-222 Camera Link PoCL Simulator
Subminiature USB Cameras
ZED 2i
AXION 1XB
PHIRE Camera Link Fiber Adapter, PoCL
18901088856
Website:http://en.cnimage.com/
Email:vision2010@cnimage.com
Address:Rm1-1705, Guoji Keji Chuangye Garden, No.1 Shangdi Xinxi Road, Haidian District,100085,Beijing PRC