(CXP) AS-FBD-1XCXP12-3PE4L

Category：Active Silicon
Visits： 99 Clicked
Date：2025-11-28 15:14:03
Download：

Details

Features

CoaXPress gives high speed data, power, and
camera control all over a single cable.
High performance CXP 2.1 with up to 25 Gigabits/s
input rate.
Fast PCI Express 3.0 (Gen3) 4-lane interface.
ActiveDMA engine – acquisition with zero CPU usage.
Comprehensive I/O including end bracket I/O.
Supports PoCXP (Power over CoaXPress).
HD-BNC (Micro-BNC) connectors.
Half-length low-profile PCIe form-factor.
Suitable for regular PCs, small embedded PCs and 2U rack mount cases.
Full GenICam support (including GenTL Producer).
High-speed data, power and camera control all over a single cable.
Supported by the proven ActiveSDK.

Specification summary

CoaXPress Interface:	Two 75 Ohm HD-BNC connectors (also known as Micro-BNC) each operates at all CXP speeds up to 12.5 Gbps. To power cameras, up to 17W is available via the HD-BNC and Power over CoaXPress (PoCXP), with 13W available at the camera according to the CoaXPress specification. FireBird Single CXP-12 supports one single-connection CXP-12 camera. LEDs on the end bracket show the link status according to the CoaXPress specification.
Buffer Memory:	Up to 2GBytes of DDR4 memory is fitted for buffering between the CoaXPress interface and the PCI Express bus.
PCI Express:	Four-lane Gen3 interface to support up to 3.4 Gbytes/sec transfer from FireBird to the PC.
I/O:	The following I/O lines are available for triggers, optical shaft encoders, exposure control and general I/O: 4 opto-isolated inputs. 4 opto-isolated outputs. 4 TTL inputs, 5V tolerant. 4 TTL I/O, 5V logic. 4 RS-422 inputs. 4 RS-422 outputs. All these I/O signals are provided on a 50-way header on the FireBird board. A 15-way D-Type connector is located on the end panel bracket and allows access to a subset of the above I/O: 2 opto-isolated inputs. 3 TTL I/O, 5V logic. 2 RS-422 inputs. 1 RS-422 output.
Power Input:	A 6-way PCI Express Graphics (PEG) connector is provided to connect to a 6-way PEG connector from the PC power supply. This is only needed for PoCXP.

Conformance

PCI Express Interface:

PCIe 3.0 (Gen3) four-lane interface with a max payload size of 512 bytes.

The FireBird Single CXP-12 low profile frame grabber supports both Short (32-bit) and Long (64-bit) Address packets. It also generates Posted Writes for image data, thus achieving transfer rates up to 3.4 Gbytes/sec, subject to host performance.

CoaXPress:

The FireBird Single CXP-12 conforms to v2.1 of the CoaXPress specification.

Approvals:

CE-mark for compliance with EMC EN 55022:2010 (class A) and EN 55024:2010 in accordance with EU directive 2014/30/EU.
RoHS compliance to RoHS3 directive 2015/863/EU.

EMC FCC Class A.

The printed circuit board is manufactured by UL recognized manufacturers and has a flammability rating of 94V-0.

Physical and environmental details

Dimensions:	PCB: 168mm by 69mm. Overall: 181mm by 69mm.
Weight:	TBA
Power consumption (typical):	+3.3V: TBA mA +12V: up to 25W with PoCXP
Storage Temperature:	-15ºC to +85ºC.
Operating Temperature:	0ºC to +60ºC.
Relative Humidity:	10% to 90% non-condensing (operating and storage).