(CXP) AS-FBD-4XCXP12-3PE4

Category：Active Silicon
Visits： 1079 Clicked
Date：2023-10-21 16:27:06
Download：

Details

Features

CoaXPress v2.1 frame grabber.
Supports CoaXPress speeds up to CXP-12.
Four connections for up to two CXP-12 or four CXP-6 cameras.
Fast PCI Express 3.0 (Gen3) 4-lane interface
ActiveDMA engine – acquisition with zero CPU usage.
Comprehensive I/O including end bracket I/O.
Supports PoCXP (Power over CoaXPress).
HD-BNC (Micro-BNC) connectors.
Standard half-length PCIe form-factor.
Full GenICam support in Windows or Linux (including GenTL Producer).
Supported by the proven ActiveSDK.

Specification summary

CoaXPress Interface:	Four 75 Ohm HD-BNC connectors (also known as Micro-BNC) each operate at all CXP speeds up to 12.5 Gbps. Up to 17W is available to power cameras on each HD-BNC via Power over CoaXPress (PoCXP), with 13W available at the camera according to the CoaXPress specification. The FireBird Quad CXP-12 3PE4 supports one dual-connection camera or two single-connection cameras up to CXP-12. More cameras may be connected, but these are the numbers for simultaneously streaming data. For support up to CXP-6, one quad-connection camera, two dual-connection cameras or up to four single-connection cameras can be connected. LEDs on the end bracket show the link status according to the CoaXPress specification.
Buffer Memory:	Up to 4 GBytes of DDR4 memory is fitted for buffering between the CoaXPress interface and the PCI Express bus.
PCI Express:	PCIe 3.0 (Gen3) 4-lane interface typically providing 3.4 Gbytes/sec transfer from FireBird to the PC, subject to PC performance.
I/O:	The following I/O lines are provided for triggers, optical shaft encoders, exposure control and general I/O: 4 opto-isolated inputs. 4 opto-isolated outputs. 4 TTL inputs, 5V tolerant. 4 TTL I/O, 5V logic. 4 RS-422 inputs. 4 RS-422 outputs. All these I/O signals are provided on a 50-way header on the FireBird board. A 15-way D-Type connector is located on the end panel bracket and allows access to a subset of the above I/O: 2 opto-isolated inputs. 3 TTL I/O, 5V logic. 2 RS-422 inputs. 1 RS-422 output.
Power Input:	An 8-way PCI Express Graphics (PEG) connector is provided to connect to a 6- or 8-way PEG connector from the PC power supply. This is only needed for PoCXP.
Fan Controller:	The fan speed is linked to the temperature of the FPGA die for optimum cooling and noise level.

Conformance

PCI Express Interface:

PCI Express 3.0 (Gen3) 4-lane interface with a max payload size of 512 bytes.

The FireBird Quad CXP-12 3PE4 supports both Short (32-bit) and Long (64-bit) Address packets. It also generates Posted Writes for image data, thus achieving transfer rates up to 3.4 Gbytes/sec, subject to host performance.

CoaXPress:

The FireBird Quad CXP-12 3PE4 conforms to v2.1 of the CoaXPress specification.

Approvals:

CE-mark for compliance with EMC EN 55022:2010 (class A) and EN 55024:2010 in accordance with EU directive 2014/30/EU.
RoHS compliance to RoHS3 directive 2015/863/EU.

EMC FCC Class A.

The printed circuit board is manufactured by UL recognized manufacturers and has a flammability rating of 94V-0.

Physical and environmental details

Dimensions:	PCB: 168mm by 111mm. Overall: 181mm by 111mm.
Weight:	190g.
Power consumption (typical):	(measured while acquiring from 4 CXP-6 connections) +3.3V: 80mA +12V: 940mA +12V PEG connector: up to 68W for PoCXP (measured while acquiring from 2 CXP-12 connections) +3.3V: 80mA +12V: 990mA +12V PEG connector: up to 34W for PoCXP
Storage Temperature:	-15ºC to +85ºC.
Operating Temperature:	0ºC to +60ºC.
Relative Humidity:	10% to 90% non-condensing (operating and storage).